200 kg, or 441 lb, as the rated load on the barbell rests. The figure covers the bar and the plates on it together. There is no separate user weight rating on this rack, because the lifter's weight goes into the floor and only the bar goes into the rests.

13 cm, or 5.1 in. Each casing measures 17 x 13 x 221 cm closed, so the pair reads as two narrow columns 221 cm (87 in.) tall standing proud of the wall by about the depth of a picture frame. Check your ceiling height against 221 cm before ordering, since the casing is fixed at that length.

Something that will carry 60 kg of rack plus a 200 kg rated load in shear, fixed through two separate casings that each run 221 cm tall. NOHrD supplies the rack in two packages for assembly and fixing on site, and we would always have the fixings specified by the installer who sees the wall. Tell us the wall construction you are working with and we will get NOHrD's installation requirements for that wall type before the order goes in. Send us a photo of the wall and the room and we will talk it through before you order.

With a foot mechanism. The columns extend out into the room when the mechanism is released by foot, and they fold back into the two casings afterwards. Opening by foot matters more than it sounds: a folding rack that takes two hands and a crouch to deploy tends to get left open, which defeats the reason for buying a folding rack.

One year from the date of shipment on the product and its components, taken to two years on components and two years on wooden components by registering the rack inside that first year. Spare parts carry ninety days. The term applies to private and commercial use alike, and it excludes normal wear, modification, and maintenance that has been skipped.

Yes, and that is one of the reasons for the full extension. Opened out, the rack leaves enough floor between the two columns to bring a bench in and press underneath the bar. The NOHrD WeightBench is the matching piece, adjustable through eight backrest positions and rated to 400 kg including dumbbells, and it comes in the same six finishes as the rack.

So a bar that contacts a rest on the way up is not stopped by it. Each rest folds briefly upward on contact and lets the bar continue, then returns to carry the bar when you rack it. On a squat driven hard out of the hole, or a press finished under the rest line, that behaviour separates a completed rep from a jarred bar.

No. NOHrD builds SpotterArms for the SquatRack as a separate item, and they are the catch that takes a bar you cannot finish or want to set down in the middle of a set. Anyone training alone should price them in from the start. We source them to order, so ask us to quote them with the rack.

Both rests are adjustable at different heights on their columns. A back squat, a front squat, an overhead press and a bench press all come off one rack. Each side is set independently, so the bar can be levelled on an uneven floor or dropped a notch on one side to suit how you unrack.

Shadow, Oak, Vintage, Club, Cherry and Walnut, which is also the order they price in. Shadow is a black-stained wood-veneered panel and the entry point of the ladder. Because this rack folds back to two tall panels on a wall with nothing else near them, the finish is doing visible work on the days nobody trains.

60 kg (132 lb) in two packages, assembled and fixed to the wall on site. The two casings are handled separately, which keeps each carton to a size that goes up a domestic stair. Book an installer for the same day as the delivery if you can, because the rack is of no use until it is on the wall.

A bar and plates, a bench, and the SpotterArms. The WeightPlate Tower and Bars supplies three Gungnir barbells and 20 plates, with the 160 cm Pumper loading to 62 kg, which sits comfortably inside the rack's 200 kg rating. The WeightBench gives you the press positions underneath it. Both come in the same six finishes, so a room ends up matched.