Skip to content
Our Story Brands Why Buy From Us Reviews FAQs Contact Us Learning Center Custom Quotes FSA/HSA Recovery Rooms Rewards Program My Account
Solbasium Polar Cold Plunge Tub
Solbasium Polar Cold Plunge Tub
Solbasium Polar Cold Plunge Tub
Solbasium Polar Cold Plunge Tub
Solbasium Polar Cold Plunge Tub
Solbasium Polar Cold Plunge Tub
Solbasium Polar Cold Plunge Tub
Solbasium Polar Cold Plunge Tub

Solbasium Polar Cold Plunge Tub

by Solbasium
$8,990.00 - $8,990.00
$8,990.00
$8,990.00 - $8,990.00
$8,990.00

✓ Authorized Solbasium Dealer
✓ Lowest Price Guaranteed
✓ FREE & FAST Shipping: In Stock and Ready to Ship
✓ Questions? Call an RFA Team Member: 1-855-864-6442

Cold Plunge + Hot Tub, All-in-One

Solbasium Polar Cold Plunge Tub

The Solbasium Polar Cold Plunge Tub, the Elite One model, is the full-stack home cold plunge: chiller, heater, filtration, sanitation, water pump, underwater lights, and app control built into one acrylic tub. Plug it into a 120V outlet, fill it, and the tub handles temperature, water quality, and circulation on its own. The 1HP chiller cools the water by up to 5°F per hour and the temperature range runs from 37°F to 108°F. The same tub works as a cold plunge in the morning and a hot soak in the evening.

A 20-micron paper-core filter pulls particulate out of the water continuously; ozone sanitation keeps the water clean between fills, and underwater lights run during sessions.

At 77 in. long x 32 in. wide x 28 in. tall, it is sized to fit standard rooms, garages, patios, and basements. It is built from acrylic for durability and easy cleaning.

Chiller
1 HP
Cools 5°F per hour
Temp Range
37°F to 108°F
Cold plunge + hot soak
Filtration
Paper core
Continuous cleaning
Dimensions
77 x 32 x 28 in.
L x W x H
Underwater lights Zero setup, fill + plug in 120V outlet Acrylic construction
Solbasium Polar Cold Plunge Tub, filled acrylic tub from above

The System

How it works

The Polar keeps every system a daily plunge needs inside the tub itself and puts the temperature on your phone. There are no external chillers and no add-on filtration loops to install.

Chiller to plunge temperature
Set a target and the system gets the tub down to plunge temperature on its own.
Set it and walk away
Heating function
The same tub also heats: the integrated heating function takes water up to 108°F, hot-tub territory, so the Polar doubles as a hot soak when you want heat instead of cold, with no second tub required.
Hot soak mode
Paper-core filtration + sanitation
Ozone sanitation handles the bacterial side, generating it in-line and circulating it through the water. Combined, the two systems keep the tub clear between fills without manual chlorine dosing.
Clear between fills
Solbasium App Control
Set the target temperature from your phone via the Solbasium App. Dial in the right temperature before you walk over: start the chiller while you're still at the office or in the gym, so the tub is ready when you arrive.
Smartphone Remote Control

Inside the Tub

How to use it

The equipment sits inside the tub's own housing, with the controls on the back.

Solbasium Polar Cold Plunge Tub, rear touchscreen panel and vent
Setup

Fill and plug in

Setup is intentionally simple: fill the tub with a hose through the filter, plug the unit in, and start the chiller. There's no special wiring requirement or plumbing installation, and no need to run cold water lines or drainage to a specific location.

Day to day, set the temperature from the touchscreen panel on the back of the tub.

  • Hose-fill with a filter
  • Controls on the back of the tub
  • No plumbing installation
120V Plug-and-Play Home or Commercial Use
Solbasium Polar Cold Plunge Tub, equipment housing open
All-in-One Build

The equipment lives inside the tub

Most home cold plunges require a separate external chiller, separate filtration, separate sanitation. Here every system sits inside one tub: chiller, heating function, filter, sanitation, water pump, and underwater lights. The setup is fill-and-plug, with no external loops to route and no second appliance to find space for.

  • Chiller built into the tub
  • Heating function for hot-soak mode
  • Water pump, built in
  • Underwater lights, built in
All-in-One Zero External Hardware

Questions

Frequently asked questions

The chiller can bring the water down to 37°F, close to the freezing point and within the standard cold-plunge target range. The chiller cools at a rate of up to 5°F per hour, so from room temperature (~70°F) you're at plunge-ready in roughly 7 hours.
Yes. The Polar has a built-in heating function, so the same tub heats and cools.
Zero setup: fill the tub with a hose through the filter, then plug it into a 120V outlet. No electrician or plumbing installation is required.
Two systems run continuously. A paper-core filter handles particulate filtration, and in-line sanitation handles bacterial control. The water pump moves water through both systems on a continuous loop.
77 inches long x 32 inches wide x 28 inches tall. It fits in a home gym, garage, basement, or patio without specialty siting.
Yes. The Solbasium App lets you set the target temperature remotely, and the touchscreen panel on the back of the tub sets it too.
The Polar arrives as one tub with its equipment built in, and you supply a hose to fill it.
Both. The Polar suits residential users as well as commercial recovery clinics.
Solbasium backs the Polar with a 1-year warranty on replacement parts, covering the chiller, pump, filtration and controller.
  • Model: Elite One
  • Chiller: 1 HP
  • Cooling rate: Up to 5°F per hour
  • Temperature range: 37°F to 108°F
  • Heating function: Built in, same tub heats and cools
  • Filter: 20-micron paper core
  • Sanitation: Ozone disinfection
  • Circulation: Built-in water circulation pump
  • Lighting: Underwater lights
  • Construction: Acrylic
  • Dimensions: 77 x 32 x 28 in. (L x W x H)
  • Power: Standard 120V outlet
  • Controls: Rear touchscreen panel, Solbasium App
  • Warranty: 1 year, replacement parts
  • Chiller: 1 HP, cools up to 5°F per hour
  • Heating: Built-in, up to 108°F for a hot soak
  • Filtration: 20-micron paper core filter, running continuously
  • Sanitation: Ozone
  • Controls: Rear touchscreen panel and the Solbasium App
  • Setup: Fill with a hose and filter, plug into a standard 120V outlet
  • Build: Acrylic tub with underwater lights and a circulation pump